Kimball Ray's Kennel

A Guide To The Various Types Of Vises Vises are a typical instrument that is used to hold a workpiece in position. It is integral to numerous types of woodworking metalworking and other manufacturing processes. Bench vises (or workbench vices or vises), in particular, are attached directly to a workbench to hold the workpiece during processes like sawing, planning, and drilling. This article will go over the different types of vises and the materials used to make them. Wood Working Vises The vise that is most frequently used as a woodworking vise is a bench vise. It consists of several components. The parts of the vise responsible to hold a piece of work are known as jaws. Jaws, each fixed and the other one moving parallel to each other is secured to the workpiece using an articulating screw that shifts one jaw toward one until they are able to fix themselves to the workpiece. Jaws are typically constructed of plastic, wood, or metal, depending on the application. Once you aim for a useful content about self-centering vise, look at this site. Bench vises do not necessarily have to be attached to workbenches--as as the surface is stable and stable, a bench vise may be attached either directly to the surface or the side. Vises attached directly to the surface's top can feature an adjustable swivel which allows the vise to rotate according to the need. Since many bench vises are made with metal jaws lined with wood or another similar material to safeguard the solidity of the workpiece may be a smart idea. Jaws can be replaced easily if they wear out. Certain bench vises are able to be used as anvils. Bench vises vary according to their durability, strength, and application. Heavy duty and medium bench vises are typically employed in industrial processes. Bench Vises Heavy-Duty Heavy-duty bench vises are usually constructed from iron to ensure they are strong enough to handle heavier applications and frequent use as well as being known as machinists' vices. These components include a precision slide bar constructed of serrated steel as well as ACME-threaded main screw. You should purchase fasteners. The screws that connect the jaws to the vise often include an additional set to replace the worn-out jaws. A bench vise that's heavy-duty is either stationary or have the ability to rotate 360 degrees. Pipe jaw bench vises have a secondary set steel pipe jaws that rotate 360 degrees and can be replaced. Medium Duty Bench Vises Medium-duty bench vises are utilized for a variety of purposes. They are constructed from iron and come with replaceable top jaws made of steel. Some also come with an swivel that rotates 360 degrees and an integrated anvil. Jaw faces can be changed between serrated and smooth sides, according to the specific purpose. Pipe Vises Pipe vises are utilized in plumbing to hold pipes or tubing secure while they're being cut or threaded. They can hold pipes that are as small as 3 millimeters in diameter or as wide as 200 mm. You can place them on a bench or with a mobile tripod. For projects that are not in the workshop the stand is typically utilized. Stands can be folded for transport , and two or more stands can be used to carry long pipes. Chain Vises To hold the pipe in place, chain vises are used to keep it in place. Chain vises clamp tightly around the pipe to keep it in position. Chains are typically made of high-tensile metal. The chain pipe vices work well with unusually-shaped pipes as well as other items. They are able to work over a larger area and higher capacity than hinged vices. This is because the vice's range of operation is limited by the chain length. Because of its huge clamping surface, the pipe's complete circumference can be held securely. However, securing the pipe with a chain pipe vice takes more time over other vice. To hold the pipe in its place, the chain must be threaded carefully between the jaws. Yoke Vises Yoke vises can also be referred to as hinged vices or jaw vices that can be adjusted. They use screws to clamp the pipe in place. A fixed v-shaped lower jaw and an adjustable upper jaw keep lengths of pipe in place. For a better grip the jaws both have serrations. The workpiece is placed on the stationary jaw. After the moving jaw is lowered using a screw to exert pressure. A tommy-bar rotates the screw to change the space between the jaws of the vice. Yoke vices are able to be clamped to a workbench or a tripod stand. They are generally constructed from cast iron. Metalworking Vises Vises for metalworking, also known as engineer's vises are designed to hold pieces of metal in place instead of wood for filing and cut them. These vises are sometimes made from cast steel but are mainly made of cast iron. Some have a cast iron body with steel channel bars. Cast iron is a popular material to use because it is rigid, strong, and inexpensive. The jaws are often separated from the rest of the piece, which allows them to be changed. Jaw covers made of soft material can be used to safeguard delicate work. They comprise copper, aluminum, wood, or plastic. The covers are usually attached to a bench and the jaws are positioned slightly above the edge. They may also feature a small anvil to the rear of their bodies and a majority have the swivel-base. Our guide provides more information about engineers' vises (also known as machinist’s vises).

Game Time

Welcome Guest

Sponsored Links